15CrMoV6
15CDV6, 14CrMoV6.9, Aerospace series — Steel FE-PL1505 (15CrMoV6) — Air melted — Hardened and tempered — Bars — De ≤ 16mm — 980 MPa ≤ Rm ≤ 1180 MPa
15CrMoV6 Datasheet
15CrMoV6 High performance special-steels-high resistance industry: EN 2213-2012 Chemical composition
| C | Si | Mn | P | S | Cr | Mo | V | Fe |
|---|---|---|---|---|---|---|---|---|
| 0.12-0.18 | ≤0.20 | 0.80-1.10 | ≤0.020 | ≤0.015 | 1.25-1.50 | 0.80-1.00 | 0.20-0.30 | ≤ ≥ |
15CrMoV6 High performance special-steels-high resistance industry: EN 2213-2012 specification
- EN 2213-2012 - Aerospace series — Steel FE-PL1505 (15CrMoV6) — Air melted — Hardened and tempered — Bars — De ≤ 16mm — 980 MPa ≤ Rm ≤ 1180 MPa
15CrMoV6 High performance special-steels-high resistance industry - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| T980 | 780 | Dia: <16mm | ||
| T1080 | 930 | Dia: 16-25mm | ||
| T1080 | 930 | Dia: 25-70mm | ||
| T980 | 780 | THK:<2mm | ||
| T1080 | 930 | THK: 2-20mm | ||
| T980 | 780 | THK:<2mm | ||
| T1080 | 930 | THK: 2-20mm |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| T980 | 980 | 1180 | Dia: <16mm | |
| T1080 | 1080 | 1280 | Dia: 16-25mm | |
| T1080 | 1080 | 1280 | Dia: 25-70mm | |
| T980 | 980 | 1180 | THK:<2mm | |
| T1080 | 1080 | 1280 | THK: 2-20mm | |
| T980 | 980 | 1180 | THK:<2mm | |
| T1080 | 1080 | 1280 | THK: 2-20mm |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| T980 | 6 | Dia: <16mm | ||
| T1080 | 8 | Dia: 16-25mm | ||
| T1080 | 6 | Dia: 25-70mm |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| T980 | 12 | Dia: <16mm | ||
| T1080 | 10 | Dia: 16-25mm | ||
| T1080 | 10 | Dia: 25-70mm |
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Type | Min | Max | Similar | Note |
|---|---|---|---|---|---|
| T980 | HB | 291 | 350 | Dia: <16mm | |
| T1080 | HB | 321 | 380 | Dia: 16-25mm | |
| T1080 | HB | 321 | 380 | Dia: 25-70mm | |
| T980 | HRC | 29 | THK:<2mm | ||
| T1080 | HRC | 33 | THK: 2-20mm | ||
| T980 | HB | 291 | THK:<2mm | ||
| T1080 | HB | 350 | THK: 2-20mm | ||
| HB | 207 | ||||
| Annealed | HB | 197 |
15CDV6 is a special steel that was first registered for the first time by Aubert & Duval (known as the famous SCV). In the 80’s, Trafiltubi was the first mill who launched the 15CDV6 in Italy and is already the undisputed specialist in its working. It is the most established and highest performance micro alloy steel for the aviation. Highest purity and excellent mechanical characteristic are coupled with high fatigue resistance, optimal weldability and workability as well as suitability to bending.
15CrMoV6 High performance special-steels-high resistance industry delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars