50Mn18Cr5
50Mn18Cr5,
50Mn18Cr5 Datasheet
50Mn18Cr5 High manganese non-magnetic hard wearing steel: JB 1268-1993 Chemical composition
| C | Si | Mn | S | P | Cr |
|---|---|---|---|---|---|
| 0.40-0.60 | 0.30-0.80 | 17.00-19.00 | ≤0.025 | ≤0.08 | 3.00-5.00 |
50Mn18Cr5 High manganese non-magnetic hard wearing steel: JB 1268-1993 specification
- JB 1268-1993 -
Other
- 热处理规范及金相组织 - 热成形后和变形强化前:固溶处理;2)变形强化后:以≤40℃/h的速率,加热到320～350℃,保温8～12h,以≤40℃/h速率缓冷至100℃以下,以消除残余应力。
50Mn18Cr5 High manganese non-magnetic hard wearing steel - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| 760 |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| 895 |
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| 25 |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| 35 |
| Heat treatment | Type | Min | Max | Similar | Note |
|---|
50Mn18Cr5无磁钢护环
50Mn18Cr5 High manganese non-magnetic hard wearing steel delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars