6481
32CrMoV12.10, 1.7765, AMS6481Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1 Mo – 0 2V – (0 29 – 0 36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted
6481 Datasheet
6481 Alloy and non alloy structural steel: AMS 6481-2012 Chemical composition
C | Mn | Si | P | S | Cr | Ni | Mo | V | Cu |
---|---|---|---|---|---|---|---|---|---|
0.29-0.36 | 0.40-0.70 | 0.1 0-0.40 | ≤0.015 | ≤0.005 | 2.80-3.30 | ≤0.30 | 0.70-1.20 | 0.15-0.35 | ≤0.10 |
6481 Alloy and non alloy structural steel: AMS 6481-2012 specification
- AMS 6481-2012 - Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1 Mo – 0.2V – (0.29 – 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted
6481 Alloy and non alloy structural steel - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
951 |
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
1137 |
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
50 |
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
13 |
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|---|---|---|---|---|
HB | 352 | 388 |
These products have been used typically for nitrided parts such as bearings, operating under heavy loads and high speeds at moderate temperatures, and subject to very rigid inspection standards, and requiring highest surface hardness, high core toughness, and less distortion than parts made from steel requiring quenching to case harden, but usage is not limited to such applications.
6481 Alloy and non alloy structural steel delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars