B16
B16, Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
B16 Datasheet
B16 Alloy and non alloy structural steel: ASTM A193/A193M 2017 Chemical composition
| C | Si | Mn | P | S | Cr | Ni | Mo | V | Al |
|---|---|---|---|---|---|---|---|---|---|
| 0.36-0.47 | 0.15-0.35 | 0.45-0.70 | ≤0.035 | ≤0.040 | 0.80-1.15 | ≤ ≥ | 0.50-0.65 | 0.25-0.35 | ≤0.015 |
B16 Alloy and non alloy structural steel: ASTM A193/A193M 2017 specification
- ASTM A179/A179M
- ASTM A193/A193M 2017 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
B16 Alloy and non alloy structural steel - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Minimum Tempering Temperature, 650°C | 725 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | 655 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | 585 | Diameter over M100 to M200 |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Minimum Tempering Temperature, 650°C | 860 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | 760 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | 690 | Diameter over M100 to M200 |
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Minimum Tempering Temperature, 650°C | 18 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | 17 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | 16 | Diameter over M100 to M200 |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Minimum Tempering Temperature, 650°C | 50 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | 45 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | 45 | Diameter over M100 to M200 |
| Heat treatment | Type | Min | Max | Similar | Note |
|---|---|---|---|---|---|
| Minimum Tempering Temperature, 650°C | HBW | 321 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | HRC | 35 | Diameter M64 and under | ||
| Minimum Tempering Temperature, 650°C | HBW | 321 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | HRC | 35 | Diameter over M64 to M100 | ||
| Minimum Tempering Temperature, 650°C | HBW | 321 | Diameter over M100 to M200 | ||
| Minimum Tempering Temperature, 650°C | HRC | 35 | Diameter over M100 to M200 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
B16 Alloy and non alloy structural steel stock
| Grade | Dim. mm | Weight kg |
|---|---|---|
| B16 | Φ75 | 5137 |
| B16 | Φ55 | 1986 |
B16 Alloy and non alloy structural steel delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars