X10CrWMoVNb9
X10CrWMoVNb9, Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties (including amendment A1:2004)
X10CrWMoVNb9 Datasheet
X10CrWMoVNb9 Stainless steels: EN 10216-2-2002 Chemical composition
C | Cr | Mn | Mo | N | Nb | Ni | P | S | Si | V | W | B | Al |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.07-0.13 | 8.50-9.50 | 0.30-0.60 | 0.30-0.60 | 0.03-0.070 | 0.04-0.09 | ≤0.40 | ≤0.02 | ≤0.010 | ≤0.50 | 0.15-0.25 | 1.50-2.00 | 0.0010-0.0060 | ≤0.040 |
X10CrWMoVNb9 Stainless steels: EN 10216-2-2002 specification
- DIN EN 10216-5
- EN 10216-2-2002 - 压力用无缝钢管-交货技术条件-第2部分:规定高温性能的非合金和合金钢管(包括修正案A1:2004)
X10CrWMoVNb9 Stainless steels - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
WT:16mm-100mm | 450 |
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
630 | 830 |
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
19 |
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|
Boiler tubes are used in heat exchange appliances in which the energy is transferred from one medium to the other. The pipes are manufactured from carbon and low-alloy steel grades which are resistant to loads under high pressure and temperatures. They are used for the construction of power engineering appliances such as: boilers, heating coils, stoves, heaters, heat exchangers.
X10CrWMoVNb9 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars