1.4122
X39CrMo17.1, 1.4122, X39CrMo17.1, 1.4122, X39CrMo17.1, 1.4122,
1.4122 Datasheet
1.4122 Stainless steels: DIN EN 10088-1 Chemical composition
| C | Si | Mn | P | S | Cr | Mo | Ni |
|---|---|---|---|---|---|---|---|
| 0.33-0.45 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.015 | 15.5-17.5 | 0.80-1.30 | ≤1.00 |
1.4122 Stainless steels: DIN EN 10088-1 specification
- DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
- DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- SEW 400 - Stainless steels for rolled and forged products
- DIN 17442 (1977) - Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments
1.4122 Stainless steels - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Type | Min | Max | Similar | Note |
|---|
1.4122 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars