IncoloyA-286
A 959 S66286, S66286, SUH 660, X6NiCrTiMoVB25.15.2, IncoloyA.286, 1.2779, 1.4980, A286, 660, 1.2779, SUH 660 WSA, SUH 660 WSB, SUH 660WSA, SUH 660WSB,
IncoloyA-286 Datasheet
IncoloyA-286 Superalloys: ASTM B516 Chemical composition
C | Cr | Ni | Mo | Ti | V | B | Mn | Fe | Al | Si | P | S |
---|---|---|---|---|---|---|---|---|---|---|---|---|
≤0.08 | 13.50-16.00 | 24.00-27.00 | 1.00-1.50 | 1.75-2.30 | 0.10-0.50 | 0.001-0.010 | 1.00-2.00 | ≤Bal | ≤0.40 | ≤1.00 | ≤0.030 | ≤0.020 |
IncoloyA-286 Superalloys: ASTM B516 specification
- ASTM B516 - Pipe
- ASTM A453 - Bolt
IncoloyA-286 Superalloys - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|
2 (B) of hot-rolled and cold-rolled sheet standard 0.003% ~ 0.010%, 2.00% or less (Mn), (P) acuities were 0.020%, 0.015% or less (S).
3 (Al) of cold drawn wire standard acuities were 0.35%, 1.75% ~ 2.35% (Ti) and (Si) 0.40% ~ 1.00%, 0.020% or less (P), (S) of 0.015% or less.
Use the wire, cold heading standards (Ti) 1.75% ~ 2.35%, 0.40% ~ 1.00% (Si), (P) acuities were 0.025%, 0.020% or less (S).
5 hot rolled and forged bar standard (Cu) of 0.25% or less.
1.5), heat treatment system is the standard heat treatment system are shown in table 1-3;Alloy is 900 ℃ heat treatment system plus or minus 10 ℃, 1 to 2 h, oil cooled to + 750 ℃ + 10 ℃, 16 h, air cooling.
IncoloyA-286 Superalloys delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars