1.4923
X 22 CrMoV 12.1, Z21CDV12, X22CrMoV12.1, Creep resisting steels, nickel and cobalt alloys
1.4923 Datasheet
1.4923 Stainless steels: EN 10088-1 (2014) Chemical composition
| C | Si | Mn | P | S | Cr | Ni | Mo | V |
|---|---|---|---|---|---|---|---|---|
| 0.18-0.24 | ≤0.50 | 0.40-0.90 | ≤0.025 | ≤0.015 | 11.00-12.50 | 0.30-0.80 | 0.80-1.20 | 0.25-0.35 |
1.4923 Stainless steels: EN 10088-1 (2014) specification
- EN 10088-1 (2014) - Stainless steels - Part 1: List of stainless steels
- EN 10269 (2013) - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- EN 10302 (2008) - Creep resisting steels, nickel and cobalt alloys
- SEW 555 - Steels for larger forgings for components in turbine and generator installations
1.4923 Stainless steels - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| QT | 600 | Dimensions | ||
| QT | 700 | Dimensions |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| QT | 800 | 950 | Dimensions below 160mm | |
| QT | 900 | 1050 | Dimensions below 160mm |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| QT | 27 | Dimensions | ||
| QT | 20 | Dimensions |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| QT | 14 | Dimensions | ||
| QT | 11 | Dimensions |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| QT | 40 | Dimensions | ||
| QT | 35 | Dimensions |
| Heat treatment | Type | Min | Max | Similar | Note |
|---|
1.4923 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars