10CrMo9-10
1.7380, 10CrMo9.10,
10CrMo9-10 Datasheet
10CrMo9-10 Stainless steels: EN 10028-2: 2009 Chemical composition
C | Si | Mn | P | S | Cr | Mo | N | Cu |
---|---|---|---|---|---|---|---|---|
0.08-0.14 | ≤0.5 | 0.4-0.8 | ≤0.020 | ≤0.010 | 2.00-2.50 | 0.90-1.10 | ≤0.012 | ≤0.3 |
10CrMo9-10 Stainless steels: EN 10028-2: 2009 specification
- EN 10028-2: 2009 - Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
- EN 10216-2: 2014 - Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10253-2: 2007 - Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
- EN 10273: 2007 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
10CrMo9-10 Stainless steels - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|
10CrMo9-10 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars