20Mn23AlV
20Mn23AlV, 用来制造大型变压器内部结构件低磁板,该钢种具有极低的磁导率和良好的力学性能及易加工性能,可以替代低磁奥氏体不锈钢及有色合金用于变压器、磁选机及电机等电器设备中不导磁部件的制造。
20Mn23AlV Datasheet
20Mn23AlV High manganese non-magnetic hard wearing steel: Chemical composition
C | Si | P | S | Mn | V | Al |
---|---|---|---|---|---|---|
0.14-0.20 | ≤0.50 | ≤0.030 | ≤0.030 | ≤ ≥ | 0.04-0.10 | 1.50-2.50 |
Other
- 在磁场强度为16×1000A/m(200奥特斯)下的磁导率μ - ≤1.05×4π×10-7H/m(1.05高/奥)
20Mn23AlV High manganese non-magnetic hard wearing steel - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
厚度=6-16mm | 255 | |||
厚度=17-30mm | 235 |
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
厚度=6-16mm | 530 | |||
厚度=17-30mm | 510 |
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|---|---|---|---|
厚度=6-16mm | 30 | |||
厚度=17-30mm | 30 |
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|
用来制造大型变压器内部结构件低磁板,该钢种具有极低的磁导率和良好的力学性能及易加工性能,可以替代低磁奥氏体不锈钢及有色合金用于变压器、磁选机及电机等电器设备中不导磁部件的制造。
20Mn23AlV高锰无磁钢主要用于制造大型变压器的内部结构件——低磁板。该钢具有极低的磁导率和良好的力学性能及易加工性能,可以替代低磁奥氏体不锈钢及有色合金,用于变压器、磁选机及电机等电器设备中不导磁部件的制造。
20Mn23AlV High manganese non-magnetic hard wearing steel delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars