Inconel 722
Inconel 722,
Inconel 722 Datasheet
Inconel 722 Superalloys: AMS 5411 Chemical composition
| C | Si | Mn | Cr | Ni | Cu | Fe | P | S | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.08 | ≤0.07 | ≤1.00 | 14.00-17.00 | ≤Balance | ≤0.5 | 5.00-9.00 | ≤ ≥ | ≤0.01 | 2-2.75 | 0.40-1.00 |
Inconel 722 Superalloys: AMS 5411 specification
- AMS 5411 - Nickel Inconel 722 AMS 5541 Strip
Inconel 722 Superalloys - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Type | Min | Max | Similar | Note |
|---|
Density (lb / cu. in.) 0.298
Specific Gravity 7.95
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.105
Electrical Resistivity (microhm-cm (at 68 Deg F)) 750
Melting Point (Deg F) 2550
Thermal Conductivity 102
Mean Coeff Thermal Expansion 5.8
Magnetic Permeability 1.002
Modulus of Elasticity Tension 31
Inconel 722 Superalloys delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars