U20082
U20082, 08F, C10E,
U20082 Datasheet
U20082 Alloy and non alloy structural steel: GB/T 699-1999 Chemical composition
C | Si | Mn | P | S | Cr | Ni | Cu |
---|---|---|---|---|---|---|---|
0.05-0.11 | ≤0.03 | 0.25-0.5 | ≤0.035 | ≤0.035 | ≤0.1 | ≤0.3 | ≤ 0.25 |
U20082 Alloy and non alloy structural steel: GB/T 699-1999 specification
- GB/T 699-1999 - This standard specifies the alloy steel, low alloy steel, alloy steel chemical composition relative to the provisions of the finished steel smelting chemical composition boundary limit allowable deviation, and gives the definition of related terms.
- GB 13237-1991 -
- GB/T 13793-1992 -
- GB 3206-1982 -
- GB/T 711-2008 -
- GB 3275-1991 -
- GB 699-1988 -
- GB 710-1991 -
- GB 711-1988 -
U20082 Alloy and non alloy structural steel - mechanical properties
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Min | Max | Similar | Note |
---|
Heat treatment | Type | Min | Max | Similar | Note |
---|
This standard specifies the alloy steel, low alloy steel, alloy steel chemical composition relative to the provisions of the finished steel smelting chemical composition boundary limit allowable deviation, and gives the definition of related terms.
ReL (MPa) | Rm (MPa) | Z (%) | A5.65 (%) | Heat treatment condition | Technology | Sampl |
---|---|---|---|---|---|---|
175(≥) | 295(≥) | 60(≥) | 35(≥) | Normalizing | 930℃ Heat preservation≥30min AC Normalizing | 25(Sampl size) |
HBS: 131(≤)
U20082 Alloy and non alloy structural steel delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars