X10CrMoVNb9-1
1.4903, X10CrMoVNb9.1,
X10CrMoVNb9-1 Datasheet
X10CrMoVNb9-1 Stainless steels: EN 10302: 2008 Chemical composition
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.08-0.12 | ≤0.5 | 0.3-0.6 | ≤0.4 | ≤0.025 | ≤0.015 | 8.0-9.5 | 0.85-1.05 | 0.18-0.25 | 0.03-0.07 | 0.06-0.10 | ≤0.03 |
X10CrMoVNb9-1 Stainless steels: EN 10302: 2008 specification
- EN 10302: 2008 - Creep resisting steels, nickel and cobalt alloys
- EN 10028-2: 2009 - Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
- EN 10222-2: 2000 - Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
- EN 10216-2: 2014 - Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10253-2: 2007 - Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
- EN 10088-1: 2005 - Stainless steels. List of stainless steels
X10CrMoVNb9-1 Stainless steels - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Type | Min | Max | Similar | Note |
|---|
X10CrMoVNb9-1 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars