XM-16
A 240 S44500, A 959 S44500, S44500, SA.240 S44500, A 313 S45500, A 564 S45500, A 693 S45500, A 705 S45500, S45500, SA.564 S45500, SA.693 S45500, SA.705 S45500, A 313 S45500, A 564 S45500, A 693 S45500, A 705 S45500, S45500, SA.564 S45500, SA.693 S45500, SA.705 S45500, Standard Specif i cation for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
XM-16 Datasheet
XM-16 Stainless steels: ASTM A564-2019 Chemical composition
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.03 | ≤0.50 | ≤0.50 | ≤0.015 | ≤0.015 | 11.0-12.50 | 7.50-9.50 | ≤0.50 | 1.50-2.50 | 0.80-1.40 | 71.5-79.2 |
XM-16 Stainless steels: ASTM A564-2019 specification
- ASTM A564-2019 - Standard Specif i cation for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
XM-16 Stainless steels - mechanical properties
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Aged H900 | 1515 | |||
| Aged H950 | 1415 | |||
| Aged H1000 | 1275 |
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Aged H900 | 1620 | |||
| Aged H950 | 1515 | |||
| Aged H1000 | 1415 |
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Min | Max | Similar | Note |
|---|---|---|---|---|
| Aged H900 | 8 | |||
| Aged H950 | 10 | |||
| Aged H1000 | 10 |
| Heat treatment | Min | Max | Similar | Note |
|---|
| Heat treatment | Type | Min | Max | Similar | Note |
|---|---|---|---|---|---|
| Solution Treatment 1525 ± 25 °F [830 ± 15 °C] (cool rapidly) | HRC | 36 |
S45500 stainless steel is a precipitation-hardening stainless steel formulated for primary forming into wrought products. XM-16 is the ASTM designation for this material. S45500 is the UNS number. And Alloy 455 is the common industry name.It has a moderately high embodied energy among wrought precipitation-hardening stainless steels. In addition, it can have a moderately high tensile strength and has a moderately high base cost.
XM-16 is an ESR remelted, martensitic Cr-Ni steel with similar corrosion resistance as martensitic steels with 15-17% chromium. Its age hardening is done in just one single treatment. It's high tenacity makes it particularly suitable for high grade instruments like screw drivers, long shafts, which have to withstand torsion resistance,
XM-16 is an ESR remelted, martensitic Cr-Ni steel with similar corrosion resistance as martensitic steels with 15-17% chromium. Its age hardening is done in just one single treatment. It's high tenacity makes it particularly suitable for high grade instruments like screw drivers, long shafts, which have to withstand torsion resistance,
medical industry and is therefore used for the manufacturing of medical, surgical and dental instruments.
XM-16 Stainless steels delivers
- Bars, hot-rolled bars, hot-rolled round bars, cold-drawn round bars, hexagonal bars, octagonal bars, hot-rolled flat bars, cold-drawn flat bars, special-shaped steel
- Hot cold rolled strip and coils
- Hot Cold Rolled Plate Sheet
- Hot rolled and Cold drawn Shaped
- Hot rolled and cold drawn wire
- Forgings and forged bars